EXFO MaxTester 635 - Manual (Page 321)

Saving, Reading, and Exporting DSL/IP Test Results
Copper and VDSL2/ADSL2+ Multi-play Test Set 313
Saving Results
Note: The Save Result tab found in the Read/Export Result application allows
you to do all of the above except upload results.
To set parameter values and save results:
1. Press the left/right and up/down arrow keys to highlight the desired
parameter.
2. Press to display the list or select the value.
3. Press the up/down arrow key to highlight the desired value.
OR
4. Press the left arrow key to erase the existing value, and then use the
alphanumeric keypad to enter a value. To cancel the entry, press .
5. Press to accept the value.
Select Result File
Select Result File page displays a list of existing file
names where you can save your results.
To save your results to an existing file name:
1. Use the up/down navigation keys to highlight the
desired FileName.
2. Press to confirm your selection.