EXFO MaxTester 635 - Manual (Page 218)

TDR
210 MAX-635
Result Details
To select the parameter values in Portrait or Landscape modes:
1. Press the up/down arrow keys to highlight the desired parameter.
2. Press the left/right arrow keys to view, select the options, or
increase/decrease values.
OR
3. Press on a value to open a list box of options.
4. Press to confirm the value.
Cable Setup
The Cable Setup page allows you to view the
Cable Parameters set for the TDR test.

Cable Type is the cable entry (with its
associated parameters) from the current
Cable Book, used for testing.

Cable Fill is the type of material the cable is
filled with: Aircore, Jelly, Pulp, 5 PR, or 2 PR.
Setup in the Cable Book.

Velocity of Propagation is the velocity of
propagation for the cable as a ratio of the
speed of light.

Cable Temperature is the temperature of the
cable under test in either degree C or F.