EXFO MaxTester 635 - Manual (Page 195)

Frequency Tests
Copper and VDSL2/ADSL2+ Multi-play Test Set 187
WB Attenuation
WB Attenuation Threshold Settings
The Threshold Settings page allows you to set the
WB Attenuation threshold values for the test.

Attenuation sets up the good attenuation
threshold parameters.

Type is the threshold limit: either Maximum or
Minimum.

Enabled is a flag to use the current threshold:
either Yes or No.
To set threshold values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press to confirm the value.