EXFO MaxTester 635 - Manual (Page 320)

Saving, Reading, and Exporting DSL/IP Test Results
312 MAX-635
Saving Results

Save Result

Select Result File button displays a list of existing file names
where you can save your results.

Result File Storage Location gives you the option of storing results
either in the MT internal memory or USB device. The default
selection comes from Application Settings/General tab.

Result File Name allows you to preview and edit the result file
name. The proposed file name is based on current auto-naming
parameters configured in Setup/Application Settings/File Name.

Upload & Save button is only enabled if there is an existing
DSL/WAN or Ethernet connection, and IPTV or VoIP are not
running.

Save button confirms if the Result File Name is saved successfully.

Export Report

Report Format is MaxTester, HTML, MHTML, or XML.
You can generate and export HTML, MHTML, or XML reports from
any saved test result. Reports include:
Product/General Information including Pass/Fail status.
Identification
Profile/Results Summary
Blank entries for your Signature and the Date.

Report File Name allows you to preview and edit the result file
name. The proposed file name is based on current auto-naming
parameters configured in Setup/Application Settings/File Name.

Export button confirms if the Report File Name is saved
successfully. If a USB device is not inserted, the following warning
dialogue box appears: USB device not present.