EXFO MaxTester 635 - Manual (Page 66)

Setting Up Copper Tests
58 MAX-635
Cable Book
Cable Details
The Cable Details page allows you to view the cable
parameter details of the currently highlighted cable
entry.

Cable ID displays the cable ID number.

Cable Name is the name of the cable in the Cable
Book.

Cable Gauge is the gauge system for measuring
wire sizes in AWG (American Wire Gauge) units
or mm (metric wire size).

Cable Fill is the type of material the cable is filled
with: Aircore, Jelly, Pulp, 5 PR, or 2 PR.

Capacitance T-R/A-B specifies a value for the capacitance per length
constant.

Capacitance T/R to GND/A/B to E specifies a value for the capacitance
per length to ground constant.

Resistance specifies a value for the resistance constant of the cable.

Attenuation @ 300 kHz specifies a value for the reduction in signal
strength or insertion loss of the cable.

VOP is the velocity of propagation for the cable as a ratio of the speed
of light.

Temperature specifies the temperature of reference at which all cable
parameters have been measured, in either F (Fahrenheit) or C
(Celsius) units. The measurement units are updated based on the
Temperature settings in Setup/Application Settings/Standard.