Altera SDI II MegaCore User Manual
Page 55
Figure 4-17: Altera Native PHY IP Core Setup in Duplex Mode
The Altera Native PHY IP Core does not include an embedded reset controller and an Avalon-MM
interface. This PHY IP core exposes all signals directly as ports. To implement reset functionality for a
new IP core, the transceiver reset controller is required to handle all the transceiver reset sequencing. The
transceiver reset controller controls the embedded reset controller and also manages additional control
options such as automatic or manual reset recovery mode.
RX
Oversample
Transceiver
Control
State Machine
RX PHY Management
& PHY Adapter
20
20
TX
Oversample
Generate
Clock Enable
TX PHY Management
& PHY Adapter
Transceiver
SDI Out
20
20
SDI In
Detect
Video
Standard
Altera
Native PHY
IP Core
Transceiver
Reset Controller
(RX)
Transceiver
Reset Controller
(TX)
Detect
1 & 1/1,001
Rate
Related Information
More information about the Altera Native PHY IP Core.
UG-01125
2015.05.04
Transceiver
4-13
SDI II IP Core Functional Description
Altera Corporation