Sdi ii ip core overview, General description, Sdi ii ip core overview -1 – Altera SDI II MegaCore User Manual

Page 6: General description -1

Advertising
background image

SDI II IP Core Overview

2

2015.05.04

UG-01125

Subscribe

Send Feedback

The SDI II IP core implements a transmitter, receiver, or full-duplex SDI at standard definition (SD), high

definition (HD), or 3 gigabits per second (3G) to 12G rate as defined by the Society of Motion Picture and

Television Engineers (SMPTE). The SDI II IP core supports dual standard (SD-SDI and HD-SDI), triple

standard (SD-SDI, HD-SDI, and 3G-SDI) and multi standard (SD-SDI, HD-SDI, 3G-SDI, 6G-SDI, and

12G-SDI). These modes provide automatic receiver rate detection and transceiver dynamic reconfigura‐

tion.
The SDI II IP core highlights the following new features:
• Supports 28 nm devices and beyond.

• Arria V GX and Stratix V from Quartus II version 12.1 onwards

• Arria V GZ and Cyclone V from Quartus II version 13.0 onwards

• Arria 10 from Quartus II version 14.0A10 onwards

• Improved integration with Altera tools (

hw.tcl

).

• IEEE encryption for functional simulation.

• Dynamic generation of user simulation testbench that matches the IP configuration.

• Dynamic generation of design example that serves as common entity for simulation and hardware

verification.

General Description

The SMPTE defines a SDI standard that is widely used as an interconnect between equipment in video

production facilities. The SDI II IP core can handle the following SDI data rates:
• 270 megabits per second (Mbps) SD-SDI, as defined by SMPTE259M-1997 10-Bit 4:2:2 Component

Serial Digital Interface

• 1.485 gigabits per second (Gbps) or 1.4835-Gbps HD-SDI, as defined by SMPTE292M-1998 Bit-Serial

Digital Interface for High Definition Television Systems

• 2.97-Gbps or 2.967-Gbps 3G SDI, as defined by SMPTE424M

• 5.94-Gbps or 5.934-Gbps 6G-SDI, as defined by SMPTEST2081

• 11.88-Gbps or 11.868-Gbps 12G-SDI, as defined by SMPTEST2082

• Dual link HD-SDI, as defined by SMPTE372M-Dual Link 1.5Gb/s Digital Interface for 1920×1080 and

2048×1080 Picture Formats

• Dual standard support for SD-SDI and HD-SDI

©

2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are

trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as

trademarks or service marks are the property of their respective holders as described at

www.altera.com/common/legal.html

. Altera warrants performance

of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any

products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,

product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device

specifications before relying on any published information and before placing orders for products or services.

ISO

9001:2008

Registered

www.altera.com

101 Innovation Drive, San Jose, CA 95134

Advertising