Altera Cyclone V E FPGA Development Board - Manual (Page 49)

Chapter 2: Board Components 2–41
Power Supply
March 2013 Altera Corporation Cyclone V E FPGA Development Board
Reference Manual
Power Supply
You can power up the development board from a laptop-style DC power input. The
input voltage must be in the range of 14 V to 20 V, current of 4.3 A, and a maximum
wattage of 65 W. The DC voltage is then stepped down to various power rails used by
the board components and installed into the HSMC connectors. An on-board
multi-channel analog-to-digital converter (ADC) measures the current for several
specific board rails.
H7 FSM_D7 D13 2.5-V Data bus
E1 FSM_D8 J15 2.5-V Data bus
E3 FSM_D9 H15 2.5-V Data bus
F3 FSM_D10 E11 2.5-V Data bus
F4 FSM_D11 D10 2.5-V Data bus
F5 FSM_D12 L10 2.5-V Data bus
H5 FSM_D13 L9 2.5-V Data bus
G7 FSM_D14 G14 2.5-V Data bus
E7 FSM_D15 F14 2.5-V Data bus
Table 2–28. Flash Pin Assignments, Schematic Signal Names, and Functions (Part 3 of 3)
Board
Reference (U10)
Schematic Signal Name
Cyclone V E FPGA
Pin Number
I/O Standard Description