Casella CEL CEL-450 - Manual (Page 30)

Operation Press Display Shows Comments
9. If required,
enable ( √ )
or disable
(X) the
functions
to
enable
quick
edit
mode
Use and to select a
field.
Use
and to change
the entry in the field.
Save the settings by
pressing again to
resume normal operation.
Then press to return to
the Setup screen.
10. Select
Period
from the
Setup
screen to
enable
measure-
ment
intervals to
be set
or
then
This screen allows a period
to be specified for regular
sequential measurement
and a shorter interval to be
set for the storage of
profiles.
Period measurement is
available only with a
CEL-490.
The predicted maximum run
time with the currently
selected parameters and
periods and the available
unused memory are also
indicated. Period
measurement is possible
only with a CEL-490.
The broadband measure-
ment period can be set to:
1, 5, 10, 15, 20, 30 seconds,
1, 5, 10 ,15, 20 , 30 minutes,
1 hour, - - - - (=none).
When available, the profile
interval must be equal to or
shorter than the period
setting.
The profile interval can be
set to:
10, 20, 50, 100, 250, 500,
milliseconds,
1, 5, 10, 15, 20, 30 seconds,
1, 5 10, 15, 20, 30 minutes.
Profiles for any of the
enabled parameters can be
stored.
Press to access quick
edit to specify measurement
and profile periods.
Page 30 - CEL-450/490 Operators Handbook
Select Mode & Setup