Select mode & setup – Casella CEL CEL-450 User Manual
Page 36
Advertising
Operation Press
Display Shows
Comments
12. Select
Frequency
from the
Setup
screen to
change the
range of
frequency
bands
measured
or
then
This screen allows the range
of frequency bands
measured to be restricted to
a particular range of interest.
13. If required,
change the
range of
frequency
bands
measured
to
enable
quick
edit
mode
Use
and
to select a
field.
Use
and
to change
the entry in the field.
Save the settings by
pressing
again to
resume normal operation.
Press
to return to the
Setup screen.
When the required narrow band setup has been selected, press
once to obtain the Narrow Band Measurement screen or twice to obtain
the Main menu that gives access to all settings and stored data.
Page 36 - CEL-450/490 Operators Handbook
Select Mode & Setup
Advertising