3 delete stored data, Operation – Casella CEL CEL-450 User Manual
Page 56
Operation Press
Display Shows
Comments
Press
then use
and
to scan the
band levels manually.
Press
to cancel.
Press
and
to display
frequency data from any
other parameters stored.
Press
and
to display
data from other periods
stored.
5.3 Delete Stored Data
Unwanted data stored in the instrument can be deleted to make room
for new data. Proceed as follows.
Operation Press
Display Shows
Comments
1. Start from
the Main
menu
This is the Main menu.
It gives access to further
menus that select:
Measurement Mode,
Measurement Setup,
Calibration Sequence,
Data Recall from Memory,
Instrument Configuration.
2. Select the
Memory
option
or
Move the reverse video
cursor to the required line.
3. Move to
the
Memory
menu
On this menu, “current”
refers to the “current
bandwidth”.
Bandwidth is selected via
the Measure Mode option
as described in Section 3.1.
Page 56 - CEL-450/490 Operators Handbook
Operation