Select mode & setup – Casella CEL CEL-450 User Manual
Page 33
Operation Press
Display Shows
Comments
1. Select
Octave or
Third
Octave
Measure-
ment as
detailed in
Section 3.1
The highlighted option will
be the bandwidth used.
2. Display the
Main
menu, then
select
Setup
then
or
This is the Main menu
screen with the reverse
video cursor highlighting the
Setup option.
3. Move to
the Setup
selection
menu
This menu allows any of the
available setups for the
chosen narrowdband to be
selected.
Highlight the setup that is to
be used.
This setup will also be
stored and used the next
time the instrument is
switched on.
4. Move to
the Setup
Screen
This screen allows the
following parameters to be
selected:
SLM weightings,
Period measurement on/off,
Measurement Functions,
Frequency range.
5. If required,
change the
weightings to
enable
quick
edit
mode
Use
and
to select a
field.
Use
and
to change
the entry in the field.
Save the settings by
pressing
again to
resume normal operation.
Press
to return to the
Setup screen.
CEL-450/490 Operators Handbook - Page 33
Select Mode & Setup