Casella CEL CEL-296 - Manual (Page 65)

9. MANUFACTURERS SERVICING & WARRANTY
ARRANGEMENTS
In order to ensure its rigid conformity with the requirements of the
specification, the instrument is thoroughly inspected and calibrated
prior to dispatch from the factory. All technical information for an
individual instrument is filed under the instrument serial number.
Therefore the serial number should be quoted in any
correspondence concerning the instrument.
The manufacturers undertake to rectify any defect in the instrument
that is directly attributable to faulty design or assembly, and which
becomes apparent during the warranty period. In order to take
advantage of this warranty, the instrument must be returned,
carriage paid, to the manufacturer's factory or accredited agent,
where necessary repairs will be carried out. The warranty period
beginning with the initial calibration date shown on the Calibration
Certificate is normally 12 months, but with exceptions on certain
specialized components supplied by other manufacturers which are
warranted for shorter periods.
Some of the specialized components used in this instrument may be
subject to longer guarantees by their actual manufacturers, and in all
such cases, the benefit of these undertakings will be passed on to
the user. However, CEL Instruments Ltd's liability is limited to items
of their own manufacture, and they do not accept liability for any loss
resulting from the operation or interpretation of the results from this
equipment.
A comprehensive Instrument Calibration Maintenance Agreement
(ICMA) scheme is available to extend the initial warranty period of
this instrument. At the end of the first warranty period, it is
recommended that the equipment be returned to the Service and
Verification Department at Hitchin, where it will be inspected and
entered into the ICMA scheme as required. The warranty will then
be extended for the period stated on the individual schedule. Please
contact your local CEL agent for full details of this service.
CEL Instruments Ltd CEL-296/3 Operator Handbook Page 65