Junger Audio MIX4 Small Desktop Mixer - Manual (Page 21)

Jünger Audio-Studiotechnik GmbH
page 18
Compilation of the DSP processing sections and their parameters as well as their displays:
Channel-strip
Display 1
st
line Display 2
nd
line
A
Selection of the DSP section : N (0 to 7) Gain reduction DSP section
0= PHASE, 1=LOWCUT
2=EQ1, 3=EQ2, 4=EQ3 (see display)
5=DE-ESSER, 6=EXPANDER
7=COMPRESS
B
First parameter of the section N.1 parameter name parameter value
C
Second parameter of the section N.2 parameter name parameter value
D
Third parameter of the section N.3 parameter name parameter value
The table compiles the parameters and their setting range of the individual sections:
# Name
Value Range
Description
0 LEFT plus / minus For stereo sources only L (plus/minus)
1 FREQ OFF, 40, 60, 80, 100, 120 Hz High pass filter
2.1 FREQ 50 ... 500 Hz
in 5 Hz steps
EQ1 mid frequencies
500 Hz ... 5 kHz in 50 Hz steps EQ1 mid frequencies
5 kHz ... 15 kHz
in 500 Hz steps
EQ1 mid frequencies
2.2 Q LS, HS, 0.5 ... 8 in 0.5 unit steps EQ1 type: LS=Low Shelf, HS=High Shelf, Q
2.3 RANGE -15 ... 0 ... 15 In 1 dB steps EQ1 attenuation / amplification
3.1 FREQ 50 Hz ... 500 Hz in 5 Hz steps EQ2 mid frequencies
500 Hz ... 5 kHz in 50 Hz steps EQ2 mid frequencies
5 kHz ... 15 kHz in 500 Hz steps EQ2 mid frequencies
3.2 Q LS, HS, 0.5 ... 8 in 0.5 unit steps EQ2 type: LS=Low Shelf, HS=High Shelf, Q
3.3 RANGE -15 ... 0 ... 15
In 1 dB steps
EQ2 attenuation / amplification
4.1 FREQ 50 Hz ... 500 Hz in 5 Hz steps EQ3 mid frequencies
500 Hz ... 5 kHz
in 50 Hz steps
EQ3 mid frequencies
5 kHz ... 15 kHz in 500 Hz steps EQ3 mid frequencies
4.2 Q LS, HS, 0.5 ... 8
in 0.5 unit steps
EQ3 type: LS=Low Shelf, HS=High Shelf, Q
4.3 RANGE -15 ... 0 ... 15 In 1 dB steps EQ3 attenuation / amplification
5.1 TYPE FEM, MAL, 1 ... 14 In 1 unit steps De-esser frequency
5.2 RANGE 0 ... –20 In 1 dB steps Working depth of the de-esser
6.1 THRESH OFF, -60 ... –20 dB in 2 dB steps Expander threshold value
6.2 RANGE -40 .... 0 dB
In 1 dB steps
Expander range
6.3 ATTACK 0.2, 0.3, 0.4, 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0 Expander response time
7.1 COMP RAT OFF/ 1: 1.3, 1.6, 2.0, 3.0, 4.0 Compressor ratio
7.2 COMP RNG 0 ... 15 In 1 dB steps Compressor amplification
7.3 COMP PRO 1 .... 9 in 1 unit steps Processing parameters of the compressors