AMETEK SL Series Calibration Manual - Manual (Page 8)

Operation Description Elgar Electronics Corporation
1.1 NAVIGATION AND SETTING
1. Press MODE and LEVEL keys simultaneously to enter calibration mode.
2. Press © (large up arrow) key to move to the next item.
3. Press
ª (large down arrow) key to move to the previous item.
4. Press † (smaller arrow) keys to adjust the calibration settings.
5. Press the SHORT key to store the calibration settings.
6. Press the LIMIT key to exit the calibration mode.
1.1.1 C
ALIBRATION PROCEDURE FLOW CHART
1-2 SLM/SLH Calibration Manual