Noah service port, Changing the noah service port – Audioscan Axiom User Manual
Page 25
Axiom
®
User's Guide Version 1.8
May 2015
NOAH Service Port
Consult your Network Administrator before changing the NOAH service port. Changing the port successfully
requires understanding the security polices on your Windows PC and computer network.
The Audioscan NOAH Module communicates with the Axiom through the NOAH network service. The Axiom
provides the NOAH service on a TCP port. The Windows computer running the module must be configured to
access the same TCP port, which is 8080 by default. Some Windows anti-virus software packages and some
network firewalls prevent access to specific ports, including 8080. Using the NOAH module in the presence of
such security settings may necessitate changing the NOAH service port.
Note that changing the NOAH service port requires restarting the Axiom software.
Changing the NOAH service port
1. Press <Change> next to the NOAH service port.
2. Select the appropriate five digits to enter the desired port number. The software will prevent you from
entering the same port as the Product web service (typically port 80).
3. Click
.
4. You will be prompted to restart the equipment. Click
to restart, or
to enter a different port
number.
25