Bolide BN1008 - iCube - Manual (Page 21)

17
PRODUCT USER MANUAL BN1008 - iCube
In this interface, click “Browse” button to change the save path of local snap, data
backup and local record, set up the packing time of local record and the holding time of
alarm log, operation log.
Fig 3-14 Local config interface
3.5 Remote Config
Click “Config” → “Remote Config” to enter the remote config page.
Double-click the device which needs to be configured in the list area. User can
configure the device remotely after system reads the device’s configuration successfully.
Fig 3-15(a) shows the IP Camera’s remote config main interface, Fig 3-15(b) shows the
DVR’s remote config main interface.
Note: Only the device with a successful connection can be configured
remotely. While other users are configuring the device, you will not be able to
access this device’s remote config interface, please try again later.
Note: The devices with different types or models have different remote config
interface. The figures provided are only for illustration; please refer to the actually
displayed interface as final.