Bolide BN1008 - iCube - Manual (Page 30)

26
PRODUCT USER MANUAL BN1008 - iCube
Fig 3-25
The number key at the top left shows the channel number; it is related to the device
model. This figure takes the 4ch device for example. The meaning of each option is as
shown in Table 3-3:
Table 3-3
Parameter Meaning
Resolution The range of options: synchronize with configured device
Fps
Range from 1~30(NTSC) or 1~25(PAL)
(Resolution and frame rate are determined by the parameter
specifications of specific type)
Encode Two options: VBR and CBR
Quality
The higher the grade is, the clearer the recorded image is. Six
grades: lowest, lower, low, medium, higher and highest.
Max Bitrate The range of options: synchronize with configured device
Record bitrate configuration can be copied to the other channel. Click “Copy” button
to copy the specified channel settings to other channel or all channels.
Click “Default” button to restore the default setting; click “Apply” button to save the
setting.
Note: If frame rate surpasses the maximum resources of device, the value will
be adjusted automatically.