Bolide BN1008 - iCube - Manual (Page 27)

23
PRODUCT USER MANUAL BN1008 - iCube
Select the display mode (synchronize with configured device); set the channel
combination of current picture group, click or button to set the previous/latter
channel groups of dwell picture; set dwell time: the time interval for a certain dwell picture
display switching to next dwell picture display.
Click “Default” button to restore the default setting; click “Apply” button to save the
setting.
3.5.2.3 Spot
Enter into “Config”àRemote ConfigàLiveàSpot; refer to Fig 3-22:
Fig 3-22
Select the display mode (synchronize with configured device); set the channel
combination of current picture group, click or button to set the previous/latter
channel groups of dwell picture; set dwell time: the time interval for a certain dwell picture
display switching to next dwell picture display.
Click “Default” button to restore the default setting; click “Apply” button to save the
setting.
3.5.2.4 Audio
Enter into “Config”àRemote ConfigàLiveàAudio. User can set the volume of each
channel.