Using the standard mode, Time mode, A. switching the display – CITIZEN MG0000 User Manual
Page 23: B. setting the time and date
Using the Standard Mode
1. Time Mode
This mode is the basic mode of this watch and is used to correct and display the time and
date.
A. Switching the Display
• The display switches between the Day Display and Location Display each time button
(C) is pressed.
• When button (B) is pressed when either the Day Display or Location Display is displayed,
the display changes to the Enlarged Display. Pressing button (B) again returns it to the
original display.
B. Setting the Time and Date
(1) The watch enters the correction state (display is flashing) when
button (C) is pressed for at least 2 seconds during any display of
the time mode.
(2) The location on the display that is flashing changes in the order
shown below each time button (C) is pressed.
23
[Day Display]
Month, date
Day
Alarm ON
mark
Location
Battery Charge
indicator
Time
Flashing
Time
(B)
(C)
(C)
(C)
(C)
(C)
(C)
(C)
(C)
(C)
(C)
Daily graphic
[Location Display]
(
C
)
(
B
)
(
D
)
(
A
)
[Enlarged Display]
(
C
)
(
B
)
(
D
)
(
A
)
Location
Contrast
(CONT)
12H/24H format
switching
Date
Month
Year
Daylight savings
time switching
Seconds
Minutes
Hours