CITIZEN MG0000 - Manual (Page 54)

3. Data Communication with PC
There are two ways for transferring data between the watch and a personal computer.
The first involves using the communication unit and USB cable provided with the watch,
and the second involves using the infrared communication function. Data can be edited
on the PC using the software provided (contained on the accessory CD-ROM) after
transferring data to the PC. The following indicates data that can be transferred to the PC.
a. Diving Log and Profile Data
/Diving data that has been transferred to the PC can be edited and managed using the
AQUALAND GRAPH 2001 software provided. For further details, refer to the section on
" Accessory Software" in this manual and the "AQUALAND GRAPH 2001" manual contained
in the accessory CD-ROM.
b. Watch Settings
/Watch settings that can be transferred to the PC include location information (name and time
difference from UTC), alarm, timer, travel time, daily graphic and dive alarm settings. Setting
data incorporated using the "CAPgm" software provided can be edited on the PC, and edited
settings can be sent back to the watch. For further details, refer to the section on
" Accessory Software" of this manual and the "CAPgm" manual contained in the accessory
CD-ROM.
* The accessory software contained in the accessory CD-ROM must be installed prior to
transferring data between the watch and PC.
* Perform communication using the USB interface as well as infrared communication within a
temperature range of +10°C to +35°C (50°F to 95°F). Data may not be able to be transferred if
outside this range.
Preparations for Communication
USB Communication
(1) Connect the personal computer and communication unit with the USB cable by
referring to the illustration below.
* Always make sure to attach the enclosed ferrite core to the USB cable before use.
* Connect the USB cable directly to the PC and communication unit. Operation is not
guaranteed when connecting through a USB hub.
54