CITIZEN MG0000 - Manual (Page 60)

(5) After confirming the contents, click on
"NEXT" to install the suitable driver from
the CD-ROM and display the screen shown
at right.
(6) Click on "Finish". Data can now be
transferred using the USB interface.
Windows2000:
(1) Turn on the power of the PC and confirm that Windows2000 has started up.
(2) End any applications that are currently running on the PC.
(3) Place the CD-ROM provided in the CD-ROM drive of the PC. If the AQUALAND GRAPH
2001 installation menu is displayed at this time, click on the "EXIT" button to close this
menu.
(4) If the communication unit is connected to
the USB port of the PC, the screen at right
is displayed.
Once the check for detecting new hardware
has been completed, the "Found New
Hardware Wizard" is displayed.
(5) After confirming the contents, click on
"NEXT" to display the screen shown at
right.
60