CITIZEN MG0000 - Manual (Page 59)

(7) Select "CD-ROM drive" and click on
"NEXT". The display changes to the
screen shown at right.
(8) Click on "NEXT" to begin installing the
driver. When installation is completed, the
display changes to the screen shown at
right.
(9) Click on "Finish" to display the screen
shown at right.
(10) Click on "YES". Windows is restarted and data can now be transferred using the USB
interface.
Windows Me:
(1) Turn on the power of the PC and confirm that Windows Me has started up.
(2) End any applications that are currently running on the PC.
(3) Place the CD-ROM provided in the CD-ROM drive of the PC. If the AQUALAND GRAPH
2001 installation menu is displayed at this time, click on the "EXIT" button to close this
menu.
(4) If the communication unit is connected to
the USB port of the PC, a message is
displayed on the PC indicating that new
hardware has been detected and that the
PC is searching for the required application
software. Once this check of new
hardware is completed, the "Add New
Hardware Wizard" is displayed.
59