CITIZEN MG0000 - Manual (Page 43)

Using the Scuba Log Mode and Skin Log
Mode
The scuba log mode is used to display the scuba diving log automatically recorded by the
watch during scuba diving. The skin log mode is used to display the skin diving log
automatically recorded by the watch during skin diving. A maximum of 100 sets of log
data can be recorded for both scuba diving and skin diving (provided that the dive time of
a single dive is within 2 hours and no more than 15 dives are made in a single day). The
contents of log data for a single dive are displayed using three displays for both the scuba
log and skin log modes.
1. Calling Up Scuba Diving Log Data
(1) The most recent scuba diving log data is displayed when the watch is switched to the
scuba log mode by pressing button (D).
(2) The log data that you want to view can be selected by pressing either button (A) or
button (B). Logs are identified according to the number of the dive (No.) among the
total number of dives.
* Old log data is called up each time button (A) is pressed, while new log data is called up each
time button (B) is pressed. (Pressing either button continuously causes the log data to change
rapidly.)
(3) The display of the selected log data changes each time button (C) is pressed.
* "DECO" is displayed on the 2nd display when decompression diving has resulted during the
course of scuba diving.
* "NO LOG" is displayed when there is no scuba diving log data recorded.
* Maximum depth (max. depth) is displayed as "- -.- m" when the maximum depth has exceeded
80.0 m (266 ft) while diving.
* The average depth (ave. depth) flashes if an abnormality has occurred in water depth
measurement while diving.
* The minimum water temperature (min.w. temp) flashes when the water temperature while
diving has exceeded the water temperature measuring range.
* Calling up log data may take some time when there is a large amount of log data recorded. In
such cases, "WAIT" is displayed while log data is being called up. The water sensor and none
of the button operations function while "WAIT" is displayed.
43
No.: Total number of
dives and date
-1- : No. of dive (1st
dive)
1st Display 2nd Display 3rd Display
(C)
(C) (C)
Surf: Surface interval
(S.I.) time
In: Time in
D.Time: Dive time
Min. w. temp Profile log
Avg: Ave. depth
Max: Max. depth