Exacq exacqVision E-Series User Manual - Manual (Page 24)

24 www.exacq.com
Configuring Video Parameters
Normally, video parameters such as brightness, contrast, saturation, and hue are controlled using exacqVision Client.
However, these features can also be controlled on the web configuration page:
1. In Live View mode, click the button at the bottom-right corner to display the Video
Parameters Setting interface:
2. Select the mode according to different light conditions. Four modes are selectable:

Standard: Use for general lighting conditions (default).

Indoor: The image is relatively smoother.

Outdoor: The image is relatively clearer and sharper. The degree of contrast and saturation is high.

Dim Light: The image is smoother than the other three modes.
3. Move the slider to set the brightness, contrast, saturation and hue from 0 to 255. The default value is 128
for the brightness, contrast, and hue; the default value is 136 for the saturation.
4. Move the slider to set the sharpness from 0 to 15 and the denoising level from 0 to 3. The default value is 3
for the sharpness and 1 for the denoising level.
NOTE: Click the
button to restore the default settings.