Exacq exacqVision E-Series User Manual - Manual (Page 5)

5 www.exacq.com
1
Introduction
exacqVision E-Series 1- and 4-channel encoders capture analog video and audio signals; encode the content using H.264,
MJPEG, and G.711 compression technologies; and transmit the data to exacqVision video servers for recording. E-Series
encoders are a cost-effective way to migrate to IP video when legacy analog CCTV equipment and infrastructure must be
used.
E-Series encoders are fully compatible with exacqVision and support configuration of motion detection, image quality,
streaming profiles, and digital inputs and outputs directly from exacqVision.
Encoding

Supports H.264 and MJPEG formats

Supports encoding video at up to 4CIF resolution

Supports dual-stream encoding.

Allows selection of compound stream encoding (with audio and video synchronization) or video stream encoding
Network

One 10M/100Mbps adaptive Ethernet interface (PoE)

Accessible by multiple web browsers, including Internet Explorer, Firefox, Chrome, and Safari

Remote web browser access by HTTPS, ensuring high security

Netfilter builds internet firewalls based on packet filtering

QoS protocol enhances the data transmission performance.

Supports SNMPv1/v2c/v3 simple network management protocol

mDNS-based Apple’s Bonjour protocol, which enables automatic discovery of devices

Zero configuration networking (Zeroconfig), which automatically obtains the IPv4 link-local IP addresses (range:
169.254.1.0~169.254.254.255).

Auto/manual port mapping by UPnP™

Discoverable by exacqVision or E-Series IP Configuration Utility

Automatically obtains IP address by DHCP protocol

RTSP/RTP standard stream media protocol, which allows user to view live by unicast

Transmission via RS-232 and RS-485 transparent channel (four-channel encoders only)

Access to Internet by PPPoE method; supports Peanut Hull, DynDNS, and more

Sets time by NTP
PTZ Control

Support multiple PTZ protocols; different channels can be configured with protocol type, RS-485 address, baud
rate, data bit, stop bit, even/odd parity, stream control method, and more; support for remote configuration of
presets, patrols, and patterns.

Relay input alarm can be responded to with PTZ linkage actions, such as presets, patrols, or patterns.