Exacq exacqVision E-Series User Manual - Manual (Page 25)

25 www.exacq.com
7
Device Configuration
NOTE: Many common settings on the encoder, such as motion configuration and video settings, can be configured in
exacqVision Client. The camera’s web configuration page should be used primarily to configure features that cannot be
changed using exacqVision Client.
Local Configuration
1. Select Local Configuration on the Configuration page to open the Local Configuration interface:
The following settings can be configured on this page:
2. Protocol Type: Two stream transmission options are available:

UDP: provides real-time audio and video streams.

TCP: ensures complete delivery of streaming data and higher video quality, but with slightly slower
transmission.
3. Stream Type: Select the web browser’s live video stream type (Main Stream or Sub Stream). See “Configuring
Video Settings” in this manualError! Reference source not found. for more information.
4. Image Size: Select the window-division view mode (4:3, 16:9, or Auto-fill).
5. Record File Size: Select the size of packed video files during manual recording (256MB, 512MB, or 1GB).
6. Live View Performance: Set the live viewing performance to Shortest Delay, Real Time, Balanced, or Fluency.
7. Auto Start Live View: Select No or Yes.
8. Highlight Event Area: Select Enable or Disable.
9. Save Record Files To: Click Browse or manually enter the path for the manually recorded video files.
10. Save Snapshots in Live View To: Click Browse or manually enter the path for the manually captured pictures in
Live View mode.
1
2
3
4
5
6
7
8
9
10