Measurement Computing DAQLog User Guide - Manual (Page 12)

12
Chapter 4
Working with Devices
DAQLog automatically detects all LGR-5320 devices that are installed and connected to your computer’s USB port.
Devices are detected when you first run DAQLog, and also if you install a device while DAQLog is running.
Devices are listed in the Logger Devices area of the Locations pane.
Viewing logger device information
When you select a logger device and select Device Info in the Available Items location, the following information
about the device appears in the DAQLog window:
 LGR-5320 Series device type
 serial number
 firmware version
 FPGA version
Synchronizing a device’s onboard clock
The Onboard Clock field lists the current time set on the device's internal clock.
To synchronize the clock of a LGR-5320 Series device with your computer’s clock, click Sync .
The onboard clock does not change for daylight savings time. It keeps real time relative to the time synchronized.