Measurement Computing DAQLog User Guide - Manual (Page 14)

14
Chapter 5
Working with SD Drives
You can store and deploy LGR-5320 Series device settings files to SD cards installed on your computer or in the
device’s SD card slot. LGR-5320 Series devices also log data and events to files on an SD inserted in the device.
When you run DAQLog, you may need to manually add and remove SD cards from the DAQLog configuration.
Adding an SD drive
To manually add an SD drive to the SD Drives pane on the main DAQLog window:
Add a volume name to your removable media
To differentiate between multiple SD cards and other removable media, use Windows Explorer to add a volume
name to each removable drive.
1. Click the Add SD Drive icon from the DAQLog toolbar.
Right-mouse click method
You can also add an SD drive by right-clicking anywhere in the Locations pane and selecting the Add…»SD Drive
option.
2. On the SD Drives pane, click on the SD card, and then click the Refresh Location toolbar icon.
The SD Drive Selection dialog opens.
3. Click Continue».
The No New Storage Devices dialog opens if no SD card is detected. Connect an SD drive to the computer,
click OK, and click Continue» again.
If an SD card is detected in a card reader or in a connected LGR-5320 Series device, another SD Drive
Selection dialog lists the available SD cards
4. Select the drive letter of the SD drive you want to add, and click OK.
The SD drive is added to the SD Drives pane as a drive letter and volume name.
Once you add an SD drive to DAQLog, you can perform the following operations: