Measurement Computing DAQLog User Guide - Manual (Page 13)

DAQLog Software User's Guide Working with Devices
13
Modifying a device’s configuration settings
To modify the settings currently loaded on a LGR-5320 Series device:
1. Make sure the device is connected to a USB port on your computer.
1. Click on the device in the Logger Devices location.
2. Click on the Log Settings file in the Available Items pane.
Change the settings loaded on the LGR-5320 Series device from the Log Setup , Channels , Acquisition , and
Events tabs.
See “Modifying Log Setup parameters” on page 28 to learn how to modify settings using these tabs.
Removing a device from the DAQLog configuration
You can remove a device from the DAQLog configuration and the Logger Devices area in order to simplify the
number of deployment targets.
To remove a device from the DAQLog configuration, select it in the Logger Devices area and click the Remove
Location icon from the DAQLog toolbar.
Right-mouse click method
You can also remove a device by right-clicking on it in the Logger Devices area and selecting Remove from the
popup menu.
The device is removed from the Logger Devices area.