Measurement Computing DAQLog User Guide - Manual (Page 20)

DAQLog Software User's Guide Working with Settings Files and Folder Locations
20
Configuring counter input parameters
The New Log Settings…Configuring Counter Inputs… dialog contains three grids of counter parameters that
determine:
 the counter input channels to log
 the counter mode used for each counter input channel
 the counter options available based on the counter
Mode selection
 the reset, index, and modulo parameters
 the default format of counter data when converted
 the debounce filtering options to use on the logged counter data
Setting the counter mode and counter options
The parameters in the top grid of the Counter Settings area are explained below.

Log: Select the check box of each counter channel whose data you want to log.

Name: Double-click on a cell in this column if you want change/add to the default name. This name appears in
the column header for the channel's log data when you view the data file in a spreadsheet.

Mode: Select the counter mode to use when logging data.