Measurement Computing DAQLog User Guide - Manual (Page 8)

8
Chapter 1
About DAQLog
DAQLog is a configuration and data logging application developed for use with Measurement Computing’s LGR-
5320 Series of data acquisition and logging devices.
With DAQLog software and a LGR-5320 Series device, you can perform the following operations:
 Create logger settings files for acquiring and logging analog, digital, and counter data from LGR-5320 Series
devices. Settings files can include analog and digital triggers, event logging, counter debounce filters, and pacer
output.
 Store logger settings files in dedicated folders for deployment, modification, and reuse.
 Deploy logger settings directly to logger devices over a USB connection, or remotely through Secure Digital
(SD) and Secure Digital High Capacity (SDHC) cards.
 Retrieve binary data and event files stored on SD/SDHC cards and convert them to comma-separated values
(.csv) files.
 Easily navigate to stored settings, data, .csv, and event files.
System requirements
You can install this DAQLog software package on a computer running one of these operating systems:
 Windows XP with Service Pack 2 (SP2)
 Windows VISTA (32- and 64-bits*)
 Windows 7(32- and 64-bits*)
* Application is 32-bits, but software does include 64-bit drivers for accessing the device.
Hardware requirements
 Minimum screen resolution of 800 x 600
 Computer with Pentium® 4 processor and 256 MB of RAM
 A Microsoft-compatible mouse
 A Measurement Computing LGR-5320 Series device