MovinCool Office Pro W20 Service Manual - Manual (Page 31)

Operation Section
31
6.4 Fan Motor
• The fan motor is a single phase, induction type
two-speed motor.
The motor rotates the fan on the evaporator
side.
Specifications:
< NOTE >
An internal overload relay is used to protect the fan motor. This relay is built into the fan motor and
interrupts the flow of current when there is an over current situation, or if abnormally high
temperature builds up in the fan motor.
6.5 Compressor Motor
• The compressor motor is a single-phase motor and is contained within the same housing as the
compressor.
Specifications:
< NOTE >
An internal overload relay is used to protect the compressor motor. This relay is built into the
compressor motor. It interrupts the flow of current when there is an over current situation or if
abnormally high temperature builds up in the compressor motor.
Rated Voltage 115 V, 60 Hz
Rated Output High: 112 W, Low: 87 W
Rated Voltage 115 V, 60 Hz
Rated Output 1160 W
ILL00139-00
CF1 (White)
CF2 (Brown)
J5 Low (Red)
J6 High (Black)
Ground
(Green/Yellow)