MovinCool Office Pro W20 Service Manual - Manual (Page 38)

Operation Section
38
(1) How to re-start the unit
• If the LCD indicates “PROGRAM ON”, press the COOL ON/OFF button to continue running the
program. If the LCD indicates “PROGRAM ON” continuously (program activated), no further
steps are necessary. If no program exists or the program was deactivated, press the FAN MODE
button or the COOL ON/OFF button. The unit returns to the previous temperature set point.
8.7 Condensate Pump Kit (optional)
• This unit comes standard with a drain tank, which collect the water that forms on the evaporator
during normal cooling operation. If the unit is required to operate continuously without periodic
emptying of this tank, a condensate pump may be needed. A condensate pump kit is available
for this unit.