Meizu M351 - Manual (Page 54)

WLAN
Enable to turn on the wireless radios.
• Connect to network: user-defined network which can configure name
and security (WEP, WPA/WPA2 PSK, 802.1x EAP, WAPI PSK);
• Connect via WPS: Connect to nearby WPS networks.
• WLAN Direct: Search for WLAN Direct network;
• Advanced settings
Bluetooth
M351uses Bluetooth technology to wirelessly connect to other Bluetooth devices and
exchange data. When turned on, you can edit the "Device name" that other devices will
see. When "Discoverable" is turned on, other Bluetooth devices nearby can find the M351.
If “Discoverable is turned off, other Bluetooth devices cannot find the M351.
Display
• Display
Sleep: Set the amount of time before the phone goes to sleep.
Sleep time is not recommended to be set to too long,
as it uses battery and may damage the screen.
Font size: Set the font size for calling history, contacts, messages
and etc.
Battery percentage: When turned on, the percentage of battery remained
will be shown on the notification bar.
• Brightness
Auto brightness : Automatically adjust screen brightness according to
the environment.
Screen brightness: Use the slider to adjust screen brightness. Higher
brightness uses more battery.
Light keys: Adjust the brightness of the light keys.
• Output
Wireless display: Turn on/off.
Sound
• Sound
Silent mode: In silent mode, all sounds are muted except for when when
the alarm starts.
Vibration: The Vibration switch allows you to turn the phone vibration
on or off.
Fade-in: The ringtone gradually adjusts the volume from low to high.
Volume: You can set the ringtone volume by dragging the volume
slider.
Note: The phone might be incompatible with other devices, and the Bluetooth connections
will be affected by the environment.
App Guide 54