ROTEL RDV-1062 - Manual (Page 19)

19 English
This system simplifies the hierarchical con-
struction of a disc and manages folders by
“groups”. This system can recognize up to 4
000 tracks/files in a disc. Also, the system can
recognize up to 150 tracks/files per group and
up to 99 groups in a disc. Since the system
ignores tracks/files with numbers exceeding
150 and groups with numbers exceeding 99,
these cannot be played back.
• If there is any type of files other than MP3/
WMA/JPEG/ASF/MPEG1/MPEG2 files in
a folder, those files are also counted in the
total file number.
Additional Disc Information
About MP3/WMA/JPEG/ASF/
MPEG1/ MPEG2 discs
Playable MP3/WMA/JPEG/ASF/MPEG1/
MPEG2 discs and files
• CDs recorded in the “packet write” format
(UDF format) are not playable.
• Files with an extension of “.mp3”, “.wma”,
“.jpg”, “.jpeg”, “.asf”, “.avi”, “.mpg” or
“.mpeg” (extensions with uppercase and
lowercase letters mixed are also acceptable)
are playable.
Notes on MP3/WMA/JPEG/ASF
discs and files
• A disc may not be played back, or reading
it may take a long time depending on its
recording conditions or properties.
• The time needed for reading varies with the
number of groups or tracks (files) recorded
on the disc.
• If a character other than single byte English
characters is used in the file name of an
MP3/WMA/JPEG/ASF file, the track/file
name will not be displayed correctly.
• The order of tracks/groups displayed on the
MP3/WMA control screen, and the order of
files/groups displayed on the JPEG control
screen may be different from that of files/
folders displayed on a computer monitor
screen.
• A commercially available MP3/WMA disc
may be played back in an order different
from that indicated on the label attached
to the disc.
• Playing back an MP3/WMA/JPEG/ASF disc
may take a long time. The elapsed time is not
displayed until playback starts. The elapsed
time may also not be displayed correctly.
• For an MP3/WMA file, a disc with a sampling
frequency of 44.1 kHz and transmission rate
of 128 kbps is recommended.
• This system can play back a baseline JPEG
file, excluding monochromatic JPEG files.
• This system can play back JPEG data taken
with a digital camera conforming to the DCF
(Design Rule for Camera File System) stan-
dard (when a function such as the automatic
image rotation function of a digital camera
is applied, the data no longer complies with
the DCF standard, so the image may not be
displayed).
• If data has been processed, edited and re-
stored with computer image editing software,
the data may not be displayed.
• This system cannot play back animations
such as MOTION2 JPEG, still images (TIFF
etc.) other than JPEG, or image data with
sound.
• The resolution of 640 x 480 pixels is rec-
ommended for JPEG files. If a file has been
recorded at a resolution of more than 640
x 480 pixels, display may take a long time.
An image with a resolution of more than
8192 x 7680 pixels cannot be displayed.
• The system supports ASF files recorded with
the maximum bit rate of 384 kbps and an
audio coder decoder of G.726.
• The maximum size of the playback picture
is 352 x 288 pixels (CIF).
Notes on MPEG1/MPEG2 discs and
files
• The stream structure of MPEG1/MPEG2
discs and files should conform to MPEG
system/program stream.
• 720 x 576 pixels (25 fps)/720 x 480 pixels
(30 fps) is recommended for the highest
resolution.
• This system also supports the resolutions of
352 x 576/480 x 576/352 x 288 pixels
(25 fps) and 352 x 480/ 480 x 480/352
x 240 pixels (30 fps).
• The profile and level should be MP@ML (Main
Profile at Main Level)/SP@ML (Simple Profile
at Main Level)/ MP@LL (Main Profile at Low
Level).
• Audio streams should conform to MPEG1
Audio Layer- 2 or MPEG2 Audio Layer-2.
Caution for DualDisc playback:
The Non-DVD side of a “DualDisc” does not
comply with the “Compact Disc Digital Audio”
standard. Therefore, the use of Non-DVD
side of a DualDisc on this product may not be
recommended.
Troubleshooting
Power source
Power does not come on.
• The power cord of the RDV-1062 is not
connected to an AC outlet.
Connect the power cord correctly.
Operation
Controls and button do not work.
• Some specific operations may be restricted
for some discs.
The remote control does not work.
• The batteries have run out.
Replace the batteries.
A disc cannot be played back.
• In the case of DVD Videos.
Check the Region Code number of the
disc.
• “PLAYABLE Err” is displayed in the display
window.
The disc cannot be played back on this
DVD player. Check the disc type. See
the “Playable Discs” and “Unplayable
Discs” sections of this manual.
MP3, WMA, JPEG, ASF, MPEG1 or
MPEG2 files cannot be played back.
• The loaded disc may include files of different
types (MP3, WMA, JPEG, ASF, MPEG1 or
MPEG2). You can play back only the files
of the types selected with “FILE TYPE”. See
the “Preference Setup/Picture” section of this
manual.
Images
No picture appears.
• The composite video cord is not connected
correctly.
See the “Audio/Video Connections”
section of this manual.
• An S-video cord and a component video
cord are connected at the same time.
Disconnect one of the cords.
The picture is distorted.
• A video cassette recorder is connected
between the DVD player and the TV.
Connect the DVD player directly to the
TV.