SoundTraxx SurroundTraxx - Manual (Page 61)

SurroundTraxx User’s Guide Configuration Guide Page 2:32 SurroundTraxx User’s Guide Configuration Guide Page 2:33
FIND Button Function Mapping
A locomotive can be dispatched either by entering a new block or through
the use of the FIND button available on select DCC cabs. If you don’t have
a cab equipped with a FIND button you can map the FIND command to any
function key between F0 and F12. This will allow any DCC cab the ability to
dispatch a locomotive before the locomotive physically moves. This setting
is a global command, meaning that the function key chosen will be the same
for all locomotives in the roundhouse. The assignment of the FIND button
doesn’t take away the capability of performing the other function the key was
otherwise assigned to. For example if we map the FIND command to F0,
the headlight will still turn on and off when the button is pressed but the first
time the button is pressed the locomotive sound files will be dispatched to
SurroundTraxx. The default is turned off.
To map the FIND command to a Function key:
Push and release the control knob, then turn the knob until SYSTEM is
displayed. Push the control knob again to select the System Menu. Turn
the control knob until the display reads FIND. Push and release the control
knob to select this. The first display will read F0. Turn the control knob until
it indicates the Function key you wish to map the Find command to and push
the control knob to select that Function key. If you intend to use the FIND
key on your cab, you should turn this feature OFF.
SurroundTraxx Diagnostic Features
The DIAGNOSTIC menu provides feedback on important aspects of
SurroundTraxx system operation. If you experience issues with your audio
installation, these diagnostic tools can help you to pinpoint the source of any
potential issues on your layout.
DCC Status
This menu option provides the status of the DCC signal and is intended
primarily for SoundTraxx support personnel.
SurroundTraxx DCC Status Indicator
Message Description
PCKT: Shows the number of DCC packets received since power-up.
ERR: Shows the number of DCC packet errors detected since power-up.
Turning the knob displays the monitored parameters.
While the DCC Status feature will occasionally indicate errors during normal
operation, excessive packet errors can prevent SurroundTraxx from receiving
Configuration Guide