Sumix SMX-160x - Manual (Page 47)

Capturing
47
Chapter 5
C
APTURING
The SMX-160 camera application enables you to capture images from the camera and to
store them in BMP or TIFF format files. You can also save files with video that you record.
Capturing Images
To capture frames:
1 Start video (press F5 or the button Start Video in the toolbar).
2 You can capture a single frame or a frame sequence:
● For a single frame press F2 or the button in the toolbar
● For a sequence press F3 or the button in the toolbar.
3 The frame/frame sequence is captured immediately and saved in the folder specified
in Capture Options (see
“Saving Options” on page 49 ).
Capture Limits
The Limits section in the Capture Options dialog box allows controlling the capture
parameters. To open the dialog box, press Alt+c on the keyboard.
You can lower the noise level in the frame being captured using the Capture single
frame as average of box. Check the box and type in the number of frame you want to
average.
Figure 5-1 Limits section
You can change the number of frame in a sequence:
1 Check the Limit sequence count to box.
2 Type in the new value in the field near the checkbox.
3 Change the time period for capturing frames in the Capture a frame every field. The
sequence capture interval cannot be less than current frame exposure time. If it is
less, an error message will be displayed when you try to perform a sequence capture: