Super Systems 9120 - Manual (Page 30)

4574 - SSi 9120 Manual Rev A Page 30 Super Systems Inc
without technical support from Super Systems Inc. Clicking on any of the values will display an input box that will allow
the user to modify the current settings.
Slave Instrument Setup
This menu option will allow the user to set up the
slave instruments for the 9120.
** All devices on the same slave port must utilize
the same protocol
** An address of zero (0) will disable the
instrument**
Some controllers (AC20, for example) can provide
dual functions (atmosphere and events) and must
have the same address assigned for both.
Clicking on the “Value” field for any instrument
will allow the user to select the slave instrument.
Instrument
This value will allow the user to select the slave instrument type.
The following is the list of instruments available as slave instruments:
SSi AC20 Eurotherm 2500 (temp) SSi Quad AO2
Yokogawa 750 (atm) Unipro v3.5 SSi Quad AO3
Honeywell UDC3300 (atm) Unipro v3.0 SSi Quad AO4
Dualpro LP1 Modbus (atm) Carbpro v3.5 Slave (temp) Yokogawa UT350
Dualpro LP2 Modbus (atm) Carbpro v3.0 Slave (temp) Yokogawa 750 Lp 2
Dualpro LP1 MMI (atm) 10Pro Yokogawa UP350
Dualpro LP2 MMI (atm) Dualpro IN C Honeywell DCP551
Eurotherm 2404 (atm) 9200 LP1 (temp) Ascon 08
Eurotherm 2500 (atm) 9200 LP2 (temp) SSi AC E
Cabpro v3.5 (atm) 9200 LP3 (temp) Yokogawa 750E
Cabpro v3.0 (atm) 9100 LP2 Mod Mux
CarbPC Eurotherm 2704 LP1 Dualpro E Modbus
9200 LP1 (atm) Eurotherm 2704 LP2 Dualpro E MMI
IR Base Eurotherm 2704 LP3 Carbpro E v3.5
MGA VC Base 1 Carbpro E v3.0
SSi 7EK VC Base 2 Eurotherm 2500
Yokogawa 750 (temp) VC Base 3 SSi 8-8
Honeywell UDC3300 (temp) VC Base 4 SSi 9200 E
Dualpro LP1 Modbus (temp) AIPC Micrologix PLC
Dualpro LP2 Modbus (temp) SSi 7SL MCM Module
Dualpro LP1 MMI (temp) AEC Flow Board PLC5 DF1
Dualpro LP2 MMI (temp) UMC800 LP1 SLC DF1
Eurotherm 2404 (temp) SSi Quad AO1
Address