Super Systems 9120 - Manual (Page 32)

4574 - SSi 9120 Manual Rev A Page 32 Super Systems Inc
This is the initial scale value. Clicking on this value will display an input box from which the user can select a new value.
The range is –32768 to 32767.
Full scale
This is the full scale value. Clicking on this value will display an input box from which the user can select a new value.
The range is –32768 to 32767.
Decimal Point Location
This is the decimal point location value. Clicking on this value will display an input box from which the user can select a
new value. The range is 0 to 4.
Open TC
This is the open TC value. Clicking on this value will toggle between up scale, and down scale.
Input Offset
The input offset value is algebraically added to the input value to adjust the input curve on read-out.
Note: The input
offsets are unscaled . The range is –5000 to 5000.
Trip Point 1 Setpoint
This is the trip point 1 setpoint value. The range is –32768 to 32768.
Trip Point 1 Force Value
This is the trip point 1 force value. The range is –32768 to 32768.
Trip Point 1 Direction
This is the trip point 1 direction. The options are: input above setpoint or input below setpoint.
Trip Point 2 Setpoint
This is the trip point 2 setpoint value. The range is –32768 to 32768.
Trip Point 2 Force Value
This is the trip point 2 force value. The
range is –32768 to 32768.
Trip Point 2 Direction
This is the trip point 2 direction. The
options are: input above setpoint or
input below setpoint.
High Input Limit Setpoint
This is the setpoint for the high input
limit. The range for this can be –
32768 to 32768.
High Input Limit Hysteresis
This is the hysteresis for the high input
limit. The range for this can be –
32768 to 32768.
Analog Output Setup
The 9120 controller has the option of