Eneo PNR-5304/4TB - Manual (Page 30)

Part 2 - Getting Started
30
• Configure Disk Bad and Disk Temperature settings
under Setup > System > Monitoring.
• Check each disk's data storage time information
under Recording Data.
! Wizard
Launches the Setup Wizard.
@ Setup
Used to access the Setup menu.
# Status Indication
Displays system status icons.
Status Indication
Indicates remote control receptivity.
Indicates connection to the NVR from a
remote program.
Indicates a zoomed in state.
Indicates Freeze is in use.
Indicates Sequence is in use.
1/4 Indicates the current screen's group.
Indicates an event monitoring.
Indicates HDD use. The icon to the left
is shown if using the overwrite setting.
Otherwise, remaining HDD space is shown
as a percentage value.
Zoom
Press the ZOOM button on the remote control and
select a channel you wish to zoom in on. A zoom frame
will appear on the selected channel. Use the arrow
buttons to position the frame. Press the Play/Pause
button to cycle through various zoom factors. When
Zoom is activated,
icon is on the status bar located
on the bottom left corner of the system.
• In Full Screen mode, activating Zoom automatically
selects the current channel.
• To restore the channel to normal size, press the
Zoom button again.