Eneo PNR-5304/4TB - Manual (Page 40)

Part 3 - Configuration
40
Storage
Use this option to configure storage settings.
• Type: Indicates the type of the installed disk.
• Capacity: Indicates the disk's capacity.
• Format: If the disk has been formatted, indicates
either Record or Not Using. If you have connected an
unformatted storage device, the Use As value will be
indicated as Not Formatted.
• Information: Indicates if the disk is being used for
recording purposes. Disks that were used in different
systems will show up as Other. Select Information
to check the saved data's time information or select
Delete to erase the data.
• Select Format to prepare the disk as a storage for
data recording.
• Disks formatted with Use As set to Not Using will
not be used for data recording.
• This NVR supports SATA2 and eSATA HDDs.
Monitoring
Use this option to configure Monitoring settings.
• Settings: Configure when and what the system
should monitor for.
• Actions: Configure alarm-out (NVR alarm-out channel,
NVR beep, camera alarm-out channel)and notification
(email, LAN1 through 5, SNS, alert window) settings.