Eneo PNR-5304/4TB - Manual (Page 36)

Part 3 - Configuration
36
Mouse
Using a mouse makes it easier to configure the settings.
A mouse lets you make selections faster and use its
wheel to scroll through long menus. You can also use
the mouse wheel to increase/decrease numerical values.
System Setup
Refer to the Menu Use on page 35 for basic
information on using the Setup menus.
General
This Setup menu contains general system options.
• Site: Used to enter a description about the system's
installation site (no description by default). You can
edit the information using the virtual keyboard.
• System ID: Used to identify the NVR apart from other
NVRs. System ID is also used to control the NVR with
the remote control.
The default System ID is 0 and can be changed to a
value between 0 and 99. The System ID can also be
entered using the virtual keyboard.
• Language: Choose a language.
• Version: Indicates the software version.
• Upgrade: Select to upgrade the system. Selecting
Upgrade displays the USB search window. You will
then be able to select an upgrade package and
upgrade the system. Once the upgrade is complete,
the NVR will reboot automatically.
If an upgrade attempt fails, an upgrade failure
message will be displayed. Refer to Error Code Types
on page 78 for more details.
• Setup: Exports current NVR settings or imports
existing settings.
• Import: Decide whether to import network settings
as well. If you do not wish to change the current
network settings, do not select Include Network
Setup.
Selecting Setup Import does not change the settings
below.
• Time-related settings (Date/Time, Time Zone, and
Use Daylight Saving Time)
• Camera-related Advanced Settings settings
• Camera-related Stream settings (Only if the
resolution is different from the camera in exporting)
• Export: Exports the current system settings to a
storage device connected to the system's USB port.
You can designate a File Name for the export file.
For USB flash memory devices, the NVR supports the
FAT32 file format only.
• Show System Log: Displays a searchable list of 5,000
most recent system log entries. For more information
on types of system log entries, refer to the System
Log Types on page 77. The icon appears next
to log entries originating from a remote source.
To export the system log, select the Export at the
bottom of the screen and then designate a file name.