Eneo PNR-5304/4TB - Manual (Page 50)

Part 3 - Configuration
50
Text insertion (POS systems)
• Setup: Configure text-in devices.
• It's possible to batch configure all text-in devices
with the exception for port settings.
• An influx of large amounts of text-in data from
multiple channels can hinder system performance.
• Text-In Product (e.g. NPC II): The setup window is
updated so that the portion below the port setting
matches the corresponding text-in device. Displayed
screenshot illustrates Generic Text settings.
• Transaction Start: Once Transaction Start has been
designated, the system will recognize the specified
string as the beginning of a transaction. You can
choose the Any Character setting. Under this setting,
any character will trigger the system into recognizing
the start of a new transaction.
• Transaction End: Once Transaction End has been
designated, the system will recognize the specified
string as the end of a transaction. Select 0 more
line(s) next to Transaction End and specify a value
between 1 and 10. The system will recognize the
specified Transaction End string plus the number of
lines as being the end of a transaction.
• Line Delimiter: Designate a string to mark the end of
a line. You can enter control strings by selecting
and then entering ^, followed by a letter. For example,
Carriage Return is ^M and Line Feed (new line) is ^J.
• Ignore String: Specify a string to ignore from
transaction records.
• Case Sensitive: Ignores case in strings designated
under Transaction Start, Transaction End, Line
Delimiter, and Ignore String.
Case Sensitive does not apply to control strings.
• Time Out: Once Time Out has been enabled, the
system will assume the end of a transaction if no new
string is entered within the specified duration of time.
Select between 5 secs and 15 mins.
Selecting RS-232, USB-Serial 1 through 8, or LAN 1
through 16 as the port activates the Port Setup button.
Select Setup and configure the Baud Rate, Data Bit,
Stop Bit, and Parity settings.
• If any one of LAN1 through 16 has been selected as
the port, select the Port Setup button and configure
the network port setting.
• If using a USB-serial port, the Text-In feature may
malfunction if the USB cable is removed while the
system is in operation.
• Title: Designate a name for the text-in device.
• Actions: Specify which actions to take when text-in is
detected.
- Record: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
- Alarm-Out: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
Notify: Configure to be notified of events by Mail, LAN1
through 5, SNS, and/or Alert Window.
- PTZ: Moves the PTZ camera to a specific preset
position when an event occurs.
In order to use the Callback feature, the NVR must be
registered on the remote program.