Eneo PNR-5304/4TB - Manual (Page 33)

Part 2 - Getting Started
33
Context Menu Access
While in Live mode, press the remote control's
button and then the Menu button to display the Context
Menu window. You can display the ContextMenu
window also by pressing the Play/Pause button and
then SETUP button on the front panel. Alternatively,
right-click on the mouse to access the Context menu.
• PTZ: Access PTZ controls.
• Zoom: Zoom in.
• Audio: Enable/disable audio. (This function supports
only in single screen.)
• Color Control: Select a channel to display its Color
Control window. Adjust the selected camera's
brightness, contrast, saturation, and hue settings.
• Information: Select a network channel to display
information about the selected channel's device.
• Edit Group: Rearrange the split screen layout.
• Camera Registration: Activate Camera Registration
mode.
• Login/Logout: Log into the account or log out of the
account.
Edit Group
Edit Group lets you customize split screen pages in both
Live and Search modes.
1
While displaying a split screen page, select the Edit
Group option from the context menu. A yellow
border is drawn around the page. Use the arrow
buttons on the front panel or the mouse to select a
different page.
2
Press a Camera button or select a camera after
pressing the Menu button. Selected camera is then
loaded on to the selected page. Repeat to assign
other channels to the page.
3
Press the remote control's button to exit Edit
Group. Alternatively, press the Menu button and
then select Exit Group Edit to exit.
Edit Group will terminate automatically after 15
seconds of inactivity.
Video Recording
Video recording will only take place if all the
connections are made correctly as per information
contained in Part 2 of this operation manual.
For more information on video recording settings, refer
to the Record Setup on page 42.
Panic Recording
Select Live or Search menu's Panic Recording icon or
press the PANIC button on the front panel or the remote
control to commence panic recording on all registered
cameras.
To stop Panic Recording, select the Panic Recording
icon or press the PANIC button again. If the Panic
Recording Duration option under Record Setup >
General has been configured, Panic Recording will
automatically terminate after the specified duration
of time has elapsed. For more information, refer to the
Record Setup on page 42.
• Panic Recording takes place irrespective of any
recording schedule set up by the user.
• Panic Recording video profile from Record Setup –
General applies to all Panic Recording videos.
Panic Recording will not take place if recording mode
is not set to Recycle and the HDD has reached 100%
of its capacity.