Eneo PNR-5304/4TB - Manual (Page 56)

Part 3 - Configuration
56
Select the icon to attach event recordings to
outgoing mails.
Select the icon to delete the account.
Select MP4 Clip to attach event recordings to outgoing
mails.
The event recordings generated by a camera can
be attached only. Select the MP4 Clip option at the
bottom to attach .mp4 video clips.
SMTP Setup
Select SMTP Setup at the bottom right corner of the
screen to configure an SMTP server.
1
Select the SMTP server Type.
2
Enter the SMTP Server's IP address or domain name
and then configure the Port and Sender settings.
Default SMTP server port number is 25. Select Test to
send out a test mail using the current settings. Select
Use SSL/TLS to use an SMTP server that requires SSL
connections.
• If you have configured the DNS Server setting under
Network - IP Address, you can enter the STMP
server's domain name instead of its IP address in the
SMTP Server field.
• Address entered under Sender must be in the
correct email format and include the @ symbol.
If user authentication is required by the SMTP server,
select Use and then enter the User and Password
information.
3
Select OK to apply and exit.
This product contains content developed by OpenSSL
Project for use in Open SSL Toolkit (http://www.
openssl.org/).
SNS
This option enables the NVR to send out SNS messages.
The SNS (Social Network Service) feature sends out
event-related messages to designated Twitter accounts.
Select the + icon at the bottom left corner of the screen
to add an SNS account. Select the icon on the right
side of the list to remove the SNS account.
Enter the User Name and Password information.
Messages may not be transmitted successfully due to
limitations in Twitter's services.