Eneo PNR-5304/4TB - Manual (Page 37)

Part 3 - Configuration
37
In order to display the system _ log.txt file, you must
use the correct character encoding settings and use a
fixed-width font.
• Clear All Data: Erases all recording data. Selecting
Clear All Data displays a confirmation window. Select
Clear to proceed.
• Before you perform Clear All Data, make sure you
are not accidentally deleting important data. Erased
data cannot be recovered.
• Clear All Data does not affect the system log.
Instead, the Clear All Data event will be added to
the log.
• System Shutdown: Shuts down the system. When
prompted, select System Shutdown.
• The system will restart after changing the channel
mode.
Date/Time
• Date: Used to change the system's date setting.
• Time: Used to change the system's time setting.
• Date Format/Time Format: Used to change the
system's date and time formats.
• Time Zone: Used to designate the system's time zone.
Refer to the map displayed on the screen and change
the time zone using the mouse or the arrow buttons.
• Use Daylight Saving Time: Enables DST correction.
• Time Sync.: Select a time server for the system to
synchronize with.
1
Select Automatic Sync.
2
Enter the Time Server's IP address or domain name
or select and then choose a server from the list of
registered time servers.
3
Specify the server synchronization Interval.
4
Select OK to apply and exit.
• If you have configured the DNS Server setting under
Network - IP Address, you can enter the time
server's domain name instead of its IP address.
• Selecting Run as Server sets the current NVR as a
time server for other NVRs within the system.
• Holiday: Designate holidays. On specified holidays,
recording takes place according to the holiday
recording schedule specified under Record Schedule.
1
Select the + button at the bottom of the window.
2
Select a date.
3
Select OK to apply and exit.
Select the icon to delete the existing holiday date.