H3C Technologies H3C S12500 Series Switches - Manual (Page 182)

166
Enabling IS-IS SNMP trap
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter IS-IS view. isis [ process-id ] [ vpn-instance vpn-instance-name ] N/A
3. Enable SNMP trap. is-snmp-traps enable Enabled by default.
Binding an IS-IS process with MIBs
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter IS-IS view.
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
N/A
3. Bind the IS-IS process with
MIBs.
isis mib-binding process-id
By default, MIBs are bound with
IS-IS process 1.
Configuring BFD for IS-IS
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter interface view. interface interface-type interface-number N/A
3. Enable IS-IS on the interface. isis enable [ process-id ] Disabled by default.
4. Enable BFD on the IS-IS
interface.
isis bfd enable Not enabled by default.
Displaying and maintaining IS-IS
Task Command Remarks
Display brief IS-IS
configuration information.
display isis brief [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display the status of IS-IS
debug switches.
display isis debug-switches { process-id |
vpn-instance vpn-instance-name } [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display the IS-IS GR state.
display isis graceful-restart status [ level-1 | level-2 ]
[ process-id | vpn-instance vpn-instance-name ] [ |
{ begin | exclude | include } regular-expression ]
Available in any view.