H3C Technologies H3C S7500E Series Switches - Manual (Page 110)

100
7
Connector
type
Code (Length)
Countries or regions
where the type of
power cords conforms
to local safety
regulations and can be
used legally
Other countries or
regions using this type of
power cords
Countries or
regions seldom
using this type of
power cords
I type
0404A01A: 3
m (9.8 ft)
Australia
Connector outline Power cord outline Connector outline
NOTE:
The connector outline figures shown in Table 32 are C19 straight connectors.
PoE power system
PoE DC power cords
PoE DC power cords are used to connect the PoE PEM of the switch and the PoE external power frame.
Table 33 PoE DC power cord specifications
PoE DC power cord Cable length
0404A0KC 3 m (9.84 ft)
PoE AC power cords
The S7500E switch uses 16 A PoE AC power cords. PoE AC power cords are used to connect the PoE AC
PEM held in the PoE external power frame and the external AC power source. The connector type varies
by country or region. For more information, see
Table 32 .
Fan trays
The fans trays are shipped with the S7500E switches, and have been installed in the S7500E switches.
If the fan tray of a switch fails, order a compatible fan tray to replace the faulty one.
Table 34 shows the available fan trays for different models of S7500E switches.