H3C Technologies H3C S7500E Series Switches - Manual (Page 71)

61
Figure 55 Removing an air filter for S7506E-V
Replacing an air filter for the other models
1. Loosen the captive screw on the air filter, as shown by callout 1 in Figure 56 .
2. Seize the captive screws on the air filter and slowly pull the air filter out of the chassis, as shown
by callout 2 in
Figure 56 .
3. Install the cleaned air filter to the switch. For the installation procedures, see "Installing the switch."
Figure 56 Removing an air filter for the other models